The Shock Treatment is prescribed for a green or cloudy pool. Providing that correct water balance has been achieved and the filtration system is in good working order, the BLU52 shock treatment will clear a pool within 48hrs.

  1. Disconnect any pool cleaners
  2. Backwash your pool for up to 2 minutes then rinse for 20 seconds and return to filter position
  3. Ensure that your pH and total alkalinity have been checked and adjusted to the prescribed levels i.e. pH 6.8 – 7.4 and alkalinity 80 – 120ppm respectively. If pH and TA need adjusting, add soda ash or acid as directed on the product.
  4. With the filter set on Filter position, break Booster seal and pour the contents into the pool weir. Immediately thereafter break Maintenance 1, 2, 3 & 4 and pour their entire contents into the pool weir. With pool filter set on Filter position, run continuously until pool clears (usually 1 – 2 days). Do not swim, brush or vacuum until the pool clears. Thereafter set pool filter to Waste and manually vacuum resultant residue on the pool floor.
  5. Reconnect the pool cleaner and reset the pool filter to Filter position. Resume normal weekly treatment after 7 days.